The 4B11 in the Genesis Coupe is a high horsepower turbocharged engine and runs a significant amount of piston-to-wall clearance. The cylinder pressure from the forced air creates more heat in turbocharged applications when compared to non-turbocharged engines, thus the "World Engine" was designed as a "loose" engine for added safety and longevity purposes. Unfortunately, a byproduct of an engine that allows a lot of blow-by is oil residue makes its way past the PCV system and ends up in the intake manifold, and many other places.
Oil residue in the combustion chamber of an engine is bad news, and can lead to really bad news with respect to how your engine runs. We have been using a real solution for over 3 years now that actually separates the oil from the air flowing between the PCV and intake manifold. It sounds easy enough, as many people have tried to adapt simple catch cans and industrial water valves to remove the oil from the air. Those products do work OK but only separate a small amount with respect to how much oil is actually passing through the system. Enter the AGP Oil Accumulator.
Our three chamber oil separator gathers the airborn oil particles through the middle chamber. Oil is separated from the air through the filtering media and drains through a perferated aluminum plate on the bottom side of the middle chamber then accumulating in the bottom chamber. As this oil gets filtered through the middle chamber, clean air is then filtered again and exits through the top chamber. This three chamber system design provides the best protection against unwanted oil making its way to the combustion process.
The Oil Accumulator is completely constructed of aluminum and is highly polished to provide some extra 'bling' to your engine bay.
TECH TIP: This fits the Genesis Coupe perfectly and comes with hose and hose clamps for an easy installation. The bottom of the Oil Accumulator has a threaded 1/4" NPT bung and a plug to allow the user an easy way to drain the oil.
Fits: Hyundai Genesis Turbo Coupe 2.0T